# Circular error probable

In the military science of ballistics, **circular error probable** (**CEP**)^{[1]} (also **circular error probability**^{[2]} or **circle of equal probability**^{[3]}) is a measure of a weapon system's precision. It is defined as the radius of a circle; centered on the mean, whose boundary is expected to include the landing points of 50% of the rounds; said otherwise, it is the median error radius.^{[4]}^{[5]} That is, if a given munitions design has a CEP of 100 m, when 100 are targeted at the same point, 50 will fall within a circle with a radius of 100 m around their average impact point. (The distance between the target point and the average impact point is referred to as bias.)

There are associated concepts, such as the DRMS (distance root mean square), which is the square root of the average squared distance error, and R95, which is the radius of the circle where 95% of the values would fall in.

The concept of CEP also plays a role when measuring the accuracy of a position obtained by a navigation system, such as GPS or older systems such as LORAN and Loran-C.

### Concept

The original concept of CEP was based on a circular bivariate normal distribution (CBN) with CEP as a parameter of the CBN just as μ and σ are parameters of the normal distribution. Munitions with this distribution behavior tend to cluster around the mean impact point, with most reasonably close, progressively fewer and fewer further away, and very few at long distance. That is, if CEP is *n* metres, 50% of rounds land within *n* metres of the mean impact, 43.7% between *n* and *2n*, and 6.1% between *2n* and *3n* metres, and the proportion of rounds that land farther than three times the CEP from the mean is only 0.2%.

CEP is not a good measure of accuracy when this distribution behavior is not met. Precision-guided munitions generally have more "close misses" and so are not normally distributed. Munitions may also have larger standard deviation of range errors than the standard deviation of azimuth (deflection) errors, resulting in an elliptical confidence region. Munition samples may not be exactly on target, that is, the mean vector will not be (0,0). This is referred to as bias.

To incorporate accuracy into the CEP concept in these conditions, CEP can be defined as the square root of the mean square error (MSE). The MSE will be the sum of the variance of the range error plus the variance of the azimuth error plus the covariance of the range error with the azimuth error plus the square of the bias. Thus the MSE results from pooling all these sources of error, geometrically corresponding to radius of a circle within which 50% of rounds will land.

Several methods have been introduced to estimate CEP from shot data. Included in these methods are the plug-in approach of Blischke and Halpin (1966), the Bayesian approach of Spall and Maryak (1992), and the maximum likelihood approach of Winkler and Bickert (2012). The Spall and Maryak approach applies when the shot data represent a mixture of different projectile characteristics (e.g., shots from multiple munitions types or from multiple locations directed at one target).

### Conversion between CEP, DRMS, 2DRMS, R95 and R99.7

While 50% is a very common definition for CEP, the circle dimension can be defined for percentages. Percentiles can be determined by recognizing that the horizontal position error is defined by a 2D vector which components are two uncorrelated orthogonal Gaussian random variables (one for each axis) each having a standard deviation . The distance error is the magnitude of that vector; it is a property of 2D Gaussian vectors that the magnitude follows the Rayleigh distribution, with a standard deviation , which by definition is the DRMS (distance root mean square) value. In turn, the properties of the Rayleigh distribution are, that its percentile at level is given by the following formula:

or, expressed in terms of the DRMS:

The relation between and are given by the following table, where the values for DRMS and 2DRMS are specific to the Rayleigh distribution and are found numerically, while the CEP, R95 and R99.7 values are definitions:

Measure of | Probability (%) |
---|---|

Distance root mean square ("DRMS") | 63.213... |

Circular error probability ("CEP", "CEP50") | 50 |

Twice the distance root mean square ("2DRMS") | 98.169... |

95% radius ("R95") | 95 |

99.7% radius ("R99.7") | 99.7 |

We can then derive a conversion table to convert values expressed for one percentile level, to another.^{[6]}^{[7]} Said conversion table, giving the coefficients to convert into , is given by:

From to | RMS () | CEP | DRMS () | R95 | 2DRMS () | R99.7 |
---|---|---|---|---|---|---|

RMS () | - | 1.1774 | 1.4142 | 2.4477 | 2.8284 | 3.4086 |

CEP | 0.8493 | – | 1.2011 | 2.0789 | 2.4022 | 2.8950 |

DRMS () | 0.7071 | 0.8326 | – | 1.7308 | 2 | 2.4103 |

R95 | 0.4085 | 0.4810 | 0.5778 | – | 1.1555 | 1.3926 |

2DRMS () | 0.3536 | 0.4163 | 0.5 | 0.8654 | – | 1.2051 |

R99.7 | 0.2934 | 0.3454 | 0.4149 | 0.7181 | 0.8298 | – |

Example: a GPS receiver having a 1.25 m DRMS error, will have a 1.251.73 = 2.16 m R95 radius.

**Warning:** often, sensor datasheets or other publications state "RMS" values which in general, *but not always*,^{[8]} stand for "DRMS" values. Also, be wary of habits coming from properties of a 1D normal distribution, such as the 68-95-99.7 rule, in essence trying to say that "R95 = 2DRMS". As shown above, these properties simply *do not* translate to the distance errors. Finally, mind that these values are obtained for a theoretical distribution; while generally being true for real data, these may be affected by other effects, which the model does not represent.

### Use in popular culture

The term is used in the movie *Clear and Present Danger* when the ground team reports "Circular error probability Zero. Impact with high order detonation. Have a nice day." Here CEP is meant to convey that the bomb landed exactly on target.^{[citation needed]}

It is also mentioned by Hot Coldman in the Metal Gear title, Metal Gear Solid: Peace Walker.^{[citation needed]}

### See also

### References

**^**Circular Error Probable (CEP), Air Force Operational Test and Evaluation Center Technical Paper 6, Ver 2, July 1987, p. 1**^**Nelson, William (1988). "Use of Circular Error Probability in Target Detection" (PDF). Bedford, MA: The MITRE Corporation; United States Air Force. Cite journal requires`|journal=`

(help)**^**Ehrlich, Robert (1985).*Waging Nuclear Peace: The Technology and Politics of Nuclear Weapons*. Albany, NY: State University of New York Press. p. 63.**^**Circular Error Probable (CEP), Air Force Operational Test and Evaluation Center Technical Paper 6, ver. 2, July 1987, p. 1**^**Payne, Craig, ed. (2006).*Principles of Naval Weapon Systems*. Annapolis, MD: Naval Institute Press. p. 342.**^**Frank van Diggelen, "GPS Accuracy: Lies, Damn Lies, and Statistics",*GPS World*, Vol 9 No. 1, January 1998**^**Frank van Diggelen, "GNSS Accuracy – Lies, Damn Lies and Statistics",*GPS World*, Vol 18 No. 1, January 2007. Sequel to previous article with similar title [1] [2]**^**For instance, the International Hydrographic Organization, in the IHO standard for hydrographic survey S-44 (fifth edition) defines "the 95% confidence level for 2D quantities (e.g. position) is defined as 2.45 x standard deviation", which is true only if we are speaking about the standard deviation of the underlying 1D variable, defined as above.

### Further reading

### External links

### Other Languages

### Copyright

- This page is based on the Wikipedia article Circular error probable; it is used under the Creative Commons Attribution-ShareAlike 3.0 Unported License (CC-BY-SA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CC-BY-SA.