The image is from Wikipedia Commons
The prefix kilo is derived from the Greek word χίλιοι (chilioi), meaning "thousand". It was originally adopted by Antoine Lavoisier's research group in 1795, and introduced into the metric system in France with its establishment in 1799.
- one kilogram (kg) is 1000 grams
- one kilometre (km) is 1000 metres
- one kilojoule (kJ) is 1000 joules
- one kilolitre (kL) is 1000 litres
- one kilobaud (kBd) is 1000 baud
- one kilohertz (kHz) is 1000 hertz
- one kilobit (kb) is 1000 bits
- one kilobyte (kB) is 1000 bytes
- one kiloohm is (kΩ) is 1000 ohms
- one kilosecond (ks) is 1000 seconds
By extension, currencies are also sometimes preceded by the prefix kilo-:
For the kilobyte, a second definition has been in common use in some fields of computer science and information technology. It uses kilobyte to mean 210 bytes (= 1024 bytes), because of the mathematical coincidence that 210 is approximately 103. The reason for this application is that digital hardware and architectures natively use base 2 exponentiation, and not decimal systems. JEDEC memory standards still permit this definition, but acknowledge the correct SI usage.
NIST comments on the confusion caused by these contrasting definitions: "Faced with this reality, the IEEE Standards Board decided that IEEE standards will use the conventional, internationally adopted, definitions of the SI prefixes", instead of kilo for 1024. To address this conflict, a new set of binary prefixes has been introduced, which is based on powers of 2. Therefore, 1024 bytes are defined as one kibibyte (1 KiB).
When units occur in exponentiation, such as in square and cubic forms, any multiplier prefix is considered part of the unit, and thus included in the exponentiation.
- 1 km2 means one square kilometre or the area of a square that measures 1000 m on each side or 106 m2 (as opposed to 1000 square meters, which is the area of a square that measures 31.6 m on each side).
- 1 km3 means one cubic kilometre or the volume of a cube that measures 1000 m on each side or 109 m3 (as opposed to 1000 cubic meters, which is the volume of a cube that measures 10 m on each side).
- milli- (inverse of kilo- prefix, denoting a factor of 1/1000)
- kibi- (binary prefix, denoting a factor of 1024)
- RKM code
- Brewster, David (1832). The Edinburgh Encyclopaedia. 12 (1st American ed.). Joseph and Edward Parker. Retrieved 2015-10-09.
- Dingler, Johann Gottfried (1823). Polytechnisches Journal (in German). 11. Stuttgart, Germany: J.W. Gotta'schen Buchhandlung. Retrieved 2015-10-09.
- Definition of binary prefixes at NIST
- Bahasa Indonesia
- Bahasa Melayu
- Norsk nynorsk
- Српски / srpski
- Tiếng Việt
- This page is based on the Wikipedia article Kilo-; it is used under the Creative Commons Attribution-ShareAlike 3.0 Unported License (CC-BY-SA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CC-BY-SA.