Phonon
In physics, a phonon is a collective excitation in a periodic, elastic arrangement of atoms or molecules in condensed matter, specifically in solids and some liquids. Often designated a quasiparticle,^{[1]} it represents an excited state in the quantum mechanical quantization of the modes of vibrations of elastic structures of interacting particles.
Phonons play a major role in many of the physical properties of condensed matter, such as thermal conductivity and electrical conductivity. The study of phonons is an important part of condensed matter physics.
The concept of phonons was introduced in 1932 by Soviet physicist Igor Tamm. The name phonon comes from the Greek word φωνή (phonē), which translates to sound or voice because longwavelength phonons give rise to sound. The name is analogous to the word photon.
Definition
A phonon is the quantum mechanical description of an elementary vibrational motion in which a lattice of atoms or molecules uniformly oscillates at a single frequency.^{[2]} In classical mechanics this designates a normal mode of vibration. Normal modes are important because any arbitrary lattice vibration can be considered to be a superposition of these elementary vibration modes (cf. Fourier analysis). While normal modes are wavelike phenomena in classical mechanics, phonons have particlelike properties too, in a way related to the wave–particle duality of quantum mechanics.
Lattice dynamics
The equations in this section do not use axioms of quantum mechanics but instead use relations for which there exists a direct correspondence in classical mechanics.
For example: a rigid regular, crystalline (not amorphous), lattice is composed of N particles. These particles may be atoms or molecules. N is a large number, say of the order of 10^{23}, or on the order of Avogadro's number for a typical sample of a solid. Since the lattice is rigid, the atoms must be exerting forces on one another to keep each atom near its equilibrium position. These forces may be Van der Waals forces, covalent bonds, electrostatic attractions, and others, all of which are ultimately due to the electric force. Magnetic and gravitational forces are generally negligible. The forces between each pair of atoms may be characterized by a potential energy function V that depends on the distance of separation of the atoms. The potential energy of the entire lattice is the sum of all pairwise potential energies multiplied by a factor of 1/2 to compensate for double counting:^{[3]}
where r_{i} is the position of the ith atom, and V is the potential energy between two atoms.
It is difficult to solve this manybody problem explicitly in either classical or quantum mechanics. In order to simplify the task, two important approximations are usually imposed. First, the sum is only performed over neighboring atoms. Although the electric forces in real solids extend to infinity, this approximation is still valid because the fields produced by distant atoms are effectively screened. Secondly, the potentials V are treated as harmonic potentials. This is permissible as long as the atoms remain close to their equilibrium positions. Formally, this is accomplished by Taylor expanding V about its equilibrium value to quadratic order, giving V proportional to the displacement x^{2} and the elastic force simply proportional to x. The error in ignoring higher order terms remains small if x remains close to the equilibrium position.
The resulting lattice may be visualized as a system of balls connected by springs. The following figure shows a cubic lattice, which is a good model for many types of crystalline solid. Other lattices include a linear chain, which is a very simple lattice which we will shortly use for modeling phonons. (For other common lattices, see crystal structure.)
The potential energy of the lattice may now be written as
Here, ω is the natural frequency of the harmonic potentials, which are assumed to be the same since the lattice is regular. R_{i} is the position coordinate of the ith atom, which we now measure from its equilibrium position. The sum over nearest neighbors is denoted (nn).
Lattice waves
Due to the connections between atoms, the displacement of one or more atoms from their equilibrium positions gives rise to a set of vibration waves propagating through the lattice. One such wave is shown in the figure to the right. The amplitude of the wave is given by the displacements of the atoms from their equilibrium positions. The wavelength λ is marked.
There is a minimum possible wavelength, given by twice the equilibrium separation a between atoms. Any wavelength shorter than this can be mapped onto a wavelength longer than 2a, due to the periodicity of the lattice. This can be thought as one consequence of Nyquist–Shannon sampling theorem, the lattice points are viewed as the "sampling points" of a continuous wave.
Not every possible lattice vibration has a welldefined wavelength and frequency. However, the normal modes do possess welldefined wavelengths and frequencies.
Onedimensional lattice
In order to simplify the analysis needed for a 3dimensional lattice of atoms, it is convenient to model a 1dimensional lattice or linear chain. This model is complex enough to display the salient features of phonons.
The forces between the atoms are assumed to be linear and nearestneighbour, and they are represented by an elastic spring. Each atom is assumed to be a point particle and the nucleus and electrons move in step (adiabatic approximation):







 n − 1 n n + 1 ← a →






···o++++++o++++++o++++++o++++++o++++++o++++++o++++++o++++++o++++++o···







 →→ → →→→
 u _{n − 1} u_{n} u _{n + 1}






where n labels the nth atom out of a total of N, a is the distance between atoms when the chain is in equilibrium, and u_{n} the displacement of the nth atom from its equilibrium position.
If C is the elastic constant of the spring and m the mass of the atom, then the equation of motion of the nth atom is
This is a set of coupled equations. Since the solutions are expected to be oscillatory, new coordinates are defined by a discrete Fourier transform, in order to decouple them.^{[4]}
Put
Here, na corresponds and devolves to the continuous variable x of scalar field theory. The Q_{k} are known as the normal coordinates, continuum field modes φ_{k}. Substitution into the equation of motion produces the following decoupled equations (this requires a significant manipulation using the orthonormality and completeness relations of the discrete Fourier transform^{[5]},
These are the equations for harmonic oscillators which have the solution
Each normal coordinate Q_{k} represents an independent vibrational mode of the lattice with wavenumber k which is known as a normal mode.
The second equation, for ω_{k}, is known as the dispersion relation between the angular frequency and the wavenumber. In the continuum limit, a→0, N→∞, with Na held fixed, u_{n} → φ(x), a scalar field, and . This amounts to free scalar classical field theory.
A onedimensional quantum mechanical harmonic chain consists of N identical atoms. This is the simplest quantum mechanical model of a lattice that allows phonons to arise from it. The formalism for this model is readily generalizable to two and three dimensions.
In some contrast to the previous section, the positions of the masses are not denoted by u_{i}, but, instead, by x_{1}, x_{2}…, as measured from their equilibrium positions (i.e. x_{i} = 0 if particle i is at its equilibrium position.) In two or more dimensions, the x_{i} are vector quantities. The Hamiltonian for this system is
where m is the mass of each atom (assuming it is equal for all), and x_{i} and p_{i} are the position and momentum operators, respectively, for the ith atom and the sum is made over the nearest neighbors (nn). However one expects that in a lattice there could also appear waves that behave like particles. It is customary to deal with waves in Fourier space which uses normal modes of the wavevector as variables instead coordinates of particles. The number of normal modes is same as the number of particles. However, the Fourier space is very useful given the periodicity of the system.
A set of N "normal coordinates" Q_{k} may be introduced, defined as the discrete Fourier transforms of the x_{k} and N "conjugate momenta" Π_{k} defined as the Fourier transforms of the p_{k}:
The quantity k_{n} turns out to be the wavenumber of the phonon, i.e. 2π divided by the wavelength.
This choice retains the desired commutation relations in either real space or wavevector space
From the general result
The potential energy term is
where
The Hamiltonian may be written in wavevector space as
The couplings between the position variables have been transformed away; if the Q and Π were Hermitian (which they are not), the transformed Hamiltonian would describe N uncoupled harmonic oscillators.
The form of the quantization depends on the choice of boundary conditions; for simplicity, periodic boundary conditions are imposed, defining the (N + 1)th atom as equivalent to the first atom. Physically, this corresponds to joining the chain at its ends. The resulting quantization is
The upper bound to n comes from the minimum wavelength, which is twice the lattice spacing a, as discussed above.
The harmonic oscillator eigenvalues or energy levels for the mode ω_{k} are:
The levels are evenly spaced at:
where 1/2ħω is the zeropoint energy of a quantum harmonic oscillator.
An exact amount of energy ħω must be supplied to the harmonic oscillator lattice to push it to the next energy level. In comparison to the photon case when the electromagnetic field is quantized, the quantum of vibrational energy is called a phonon.
All quantum systems show wavelike and particlelike properties simultaneously. The particlelike properties of the phonon are best understood using the methods of second quantization and operator techniques described later.^{[6]}
Threedimensional lattice
This may be generalized to a threedimensional lattice. The wavenumber k is replaced by a threedimensional wavevector k. Furthermore, each k is now associated with three normal coordinates.
The new indices s = 1, 2, 3 label the polarization of the phonons. In the onedimensional model, the atoms were restricted to moving along the line, so the phonons corresponded to longitudinal waves. In three dimensions, vibration is not restricted to the direction of propagation, and can also occur in the perpendicular planes, like transverse waves. This gives rise to the additional normal coordinates, which, as the form of the Hamiltonian indicates, we may view as independent species of phonons.
Dispersion relation
For a onedimensional alternating array of two types of ion or atom of mass m_{1}, m_{2} repeated periodically at a distance a, connected by springs of spring constant K, two modes of vibration result:^{[8]}
where k is the wavevector of the vibration related to its wavelength by .
The connection between frequency and wavevector, ω = ω(k), is known as a dispersion relation. The plus sign results in the socalled optical mode, and the minus sign to the acoustic mode. In the optical mode two adjacent different atoms move against each other, while in the acoustic mode they move together.
The speed of propagation of an acoustic phonon, which is also the speed of sound in the lattice, is given by the slope of the acoustic dispersion relation, ∂ω_{k}/∂k (see group velocity.) At low values of k (i.e. long wavelengths), the dispersion relation is almost linear, and the speed of sound is approximately ωa, independent of the phonon frequency. As a result, packets of phonons with different (but long) wavelengths can propagate for large distances across the lattice without breaking apart. This is the reason that sound propagates through solids without significant distortion. This behavior fails at large values of k, i.e. short wavelengths, due to the microscopic details of the lattice.
For a crystal that has at least two atoms in its primitive cell, the dispersion relations exhibit two types of phonons, namely, optical and acoustic modes corresponding to the upper blue and lower red curve in the diagram, respectively. The vertical axis is the energy or frequency of phonon, while the horizontal axis is the wavevector. The boundaries at −π/a and π/a are those of the first Brillouin zone.^{[8]} A crystal with N ≥ 2 different atoms in the primitive cell exhibits three acoustic modes: one longitudinal acoustic mode and two transverse acoustic modes. The number of optical modes is 3N – 3. The lower figure shows the dispersion relations for several phonon modes in GaAs as a function of wavevector k in the principal directions of its Brillouin zone.^{[7]}
Many phonon dispersion curves have been measured by neutron scattering.
The physics of sound in fluids differs from the physics of sound in solids, although both are density waves: sound waves in fluids only have longitudinal components, whereas sound waves in solids have longitudinal and transverse components. This is because fluids can't support shear stresses (but see viscoelastic fluids, which only apply to high frequencies).
Interpretation of phonons using second quantization techniques
In fact, the abovederived Hamiltonian looks like the classical Hamiltonian function, but if it is interpreted as an operator, then it describes a quantum field theory of noninteracting bosons.
The energy spectrum of this Hamiltonian is easily obtained by the method of ladder operators, similar to the quantum harmonic oscillator problem. We introduce a set of ladder operators defined by:^{[citation needed]}
By direct insertion on the Hamiltonian, it is readily verified that^{[citation needed]}
As with the quantum harmonic oscillator, one can show that b_{k}^{†} and b_{k} respectively create and destroy one excitation of energy ħω_{k}. These excitations are phonons.^{[citation needed]}
Two important properties of phonons may be deduced. Firstly, phonons are bosons, since any number of identical excitations can be created by repeated application of the creation operator b_{k}^{†}. Secondly, each phonon is a "collective mode" caused by the motion of every atom in the lattice. This may be seen from the fact that the ladder operators contain sums over the position and momentum operators of every atom.^{[citation needed]}
It is not a priori obvious that these excitations generated by the b operators are literally waves of lattice displacement, but one may convince oneself of this by calculating the position–position correlation function.^{[citation needed]} Let k⟩ denote a state with a single quantum of mode k excited, i.e.
One can show that, for any two atoms j and l,
which has the form of a lattice wave with frequency ω_{k} and wavenumber k.
In three dimensions the Hamiltonian has the form
 ^{[citation needed]}
Acoustic and optical phonons
Solids with more than one atom in the smallest unit cell exhibit two types of phonons: acoustic phonons and optical phonons.
Acoustic phonons are coherent movements of atoms of the lattice out of their equilibrium positions. If the displacement is in the direction of propagation, then in some areas the atoms will be closer, in others farther apart, as in a sound wave in air (hence the name acoustic). Displacement perpendicular to the propagation direction is comparable to waves on a string. If the wavelength of acoustic phonons goes to infinity, this corresponds to a simple displacement of the whole crystal, and this costs zero deformation energy. Acoustic phonons exhibit a linear relationship between frequency and phonon wavevector for long wavelengths. The frequencies of acoustic phonons tend to zero with longer wavelength. Longitudinal and transverse acoustic phonons are often abbreviated as LA and TA phonons, respectively.
Optical phonons are outofphase movements of the atoms in the lattice, one atom moving to the left, and its neighbour to the right. This occurs if the lattice basis consists of two or more atoms. They are called optical because in ionic crystals, like sodium chloride, they are excited by infrared radiation. The electric field of the light will move every positive sodium ion in the direction of the field, and every negative chloride ion in the other direction, sending the crystal vibrating.
Optical phonons have a nonzero frequency at the Brillouin zone center and show no dispersion near that long wavelength limit. This is because they correspond to a mode of vibration where positive and negative ions at adjacent lattice sites swing against each other, creating a timevarying electrical dipole moment. Optical phonons that interact in this way with light are called infrared active. Optical phonons that are Raman active can also interact indirectly with light, through Raman scattering. Optical phonons are often abbreviated as LO and TO phonons, for the longitudinal and transverse modes respectively; the splitting between LO and TO frequencies is often described accurately by the Lyddane–Sachs–Teller relation.
When measuring optical phonon energy by experiment, optical phonon frequencies are sometimes given in spectroscopic wavenumber notation, where the symbol ω represents ordinary frequency (not angular frequency), and is expressed in units of cm^{−1}. The value is obtained by dividing the frequency by the speed of light in vacuum. In other words, the frequency in cm^{−1} units corresponds to the inverse of the wavelength of a photon in vacuum, that has the same frequency as the measured phonon.^{[9]} The cm^{−1} is a unit of energy used frequently in the dispersion relations of both acoustic and optical phonons, see units of energy for more details and uses.
Crystal momentum
By analogy to photons and matter waves, phonons have been treated with wavevector k as though it has a momentum ħk,^{[10]} however, this is not strictly correct, because ħk is not actually a physical momentum; it is called the crystal momentum or pseudomomentum. This is because k is only determined up to addition of constant vectors (the reciprocal lattice vectors and integer multiples thereof). For example, in the onedimensional model, the normal coordinates Q and Π are defined so that
where
for any integer n. A phonon with wavenumber k is thus equivalent to an infinite family of phonons with wavenumbers k ± 2π/a, k ± 4π/a, and so forth. Physically, the reciprocal lattice vectors act as additional chunks of momentum which the lattice can impart to the phonon. Bloch electrons obey a similar set of restrictions.
It is usually convenient to consider phonon wavevectors k which have the smallest magnitude k in their "family". The set of all such wavevectors defines the first Brillouin zone. Additional Brillouin zones may be defined as copies of the first zone, shifted by some reciprocal lattice vector.
Thermodynamics
The thermodynamic properties of a solid are directly related to its phonon structure. The entire set of all possible phonons that are described by the phonon dispersion relations combine in what is known as the phonon density of states which determines the heat capacity of a crystal. By the nature of this distribution, the heat capacity is dominated by the highfrequency part of the distribution, while thermal conductivity is primarily the result of the lowfrequency region.^{[citation needed]}
At absolute zero temperature, a crystal lattice lies in its ground state, and contains no phonons. A lattice at a nonzero temperature has an energy that is not constant, but fluctuates randomly about some mean value. These energy fluctuations are caused by random lattice vibrations, which can be viewed as a gas of phonons. Because these phonons are generated by the temperature of the lattice, they are sometimes designated thermal phonons.^{[citation needed]}
Thermal phonons can be created and destroyed by random energy fluctuations. In the language of statistical mechanics this means that the chemical potential for adding a phonon is zero. This behavior is an extension of the harmonic potential into the anharmonic regime. The behavior of thermal phonons is similar to the photon gas produced by an electromagnetic cavity, wherein photons may be emitted or absorbed by the cavity walls. This similarity is not coincidental, for it turns out that the electromagnetic field behaves like a set of harmonic oscillators, giving rise to Blackbody radiation. Both gases obey the Bose–Einstein statistics: in thermal equilibrium and within the harmonic regime, the probability of finding phonons or photons in a given state with a given angular frequency is:^{[citation needed]}
where ω_{k,s} is the frequency of the phonons (or photons) in the state, k_{B} is Boltzmann's constant, and T is the temperature.
Heat flow in nanometerwide gaps
The idea of quantum tunneling applied to phonons produces the idea of phonon tunneling, where across nanometerwide gaps, heat can transfer between materials from phonon that "tunnel" between the two materials.^{[11]} The type of heat transfer works between distances too large for conduction to occur but too small for radiation to occur.
Operator formalism
The phonon Hamiltonian is given by
In terms of the operators, these are given by
Here, in expressing the Hamiltonian in operator formalism, we have not taken into account the 1/2ħω_{q} term, since if we take an infinite lattice or, for that matter a continuum, the 1/2ħω_{q} terms will add up giving an infinity. Hence, it is "renormalized" by putting the factor of 1/2ħω_{q} to 0 arguing that the difference in energy is what we measure and not the absolute value of it. Hence, the 1/2ħω_{q} factor is absent in the operator formalised expression for the Hamiltonian.
The ground state also called the "vacuum state" is the state composed of no phonons. Hence, the energy of the ground state is 0. When, a system is in state n_{1}n_{2}n_{3}…⟩, we say there are n_{α} phonons of type α. The n_{α} are called the occupation number of the phonons. Energy of a single phonon of type α being ħω_{q}, the total energy of a general phonon system is given by n_{1}ħω_{1} + n_{2}ħω_{2} +…. In other words, the phonons are noninteracting. The action of creation and annihilation operators are given by
and,
i.e. a_{α}^{†} creates a phonon of type α while a_{α} annihilates. Hence, they are respectively the creation and annihilation operator for phonons. Analogous to the quantum harmonic oscillator case, we can define particle number operator as
The number operator commutes with a string of products of the creation and annihilation operators if, the number of a are equal to number of a^{†}.
Phonons are bosons, since α,β⟩ = β,α⟩ i.e. they are symmetric under exchange.^{[12]}
Nonlinearity
As well as photons, phonons can interact via parametric down conversion^{[13]} and form squeezed coherent states.^{[14]}
Predicted properties
Even though phonons are often used as a quasiparticle, some popular research has shown that phonons and rotons may indeed have some kind of mass and be affected by gravity as standard particles are.^{[15]} In particular, phonons are predicted to have a kind of negative mass and negative gravity.^{[16]} This can be explained by how phonons are known to travel faster in denser materials. Because the part of a material pointing towards a gravitational source is closer to the object, it becomes denser on that end. From this, it is predicted that phonons would deflect away as it detects the difference in densities, exhibiting the qualities of a negative gravitational field.^{[17]} Although the effect would be too small to measure, it is possible that future equipment could lead to successful results.
Phonons have also been predicted to play a key role in superconductivity in materials and the prediction of superconductive compounds.^{[18]}
See also
References
 ^ Schwabl, Franz (2008). Advanced Quantum Mechanics (4th ed.). Springer. p. 253. ISBN 9783540850625.
 ^ Simon, Steven H. (2013). The Oxford solid state basics (1st ed.). Oxford: Oxford University Press. p. 82. ISBN 9780199680771.
 ^ Krauth, Werner (April 2006). Statistical mechanics: algorithms and computations. International publishing locations: Oxford University Press. pp. 231–232. ISBN 9780198515364.
 ^ Mattuck, R. A guide to Feynman Diagrams in the manybody problem.
 ^ Fetter, Alexander; Walecka, John (20031216). Theoretical Mechanics of Particles and Continua. Dover Books on Physics. ISBN 9780486432618.
 ^ Mahan, G. D. (1981). ManyParticle Physics. New York: Springer. ISBN 9780306463389.
 ^ ^{a} ^{b} Yu, Peter Y.; Cardona, Manuel (2010). "Fig. 3.2: Phonon dispersion curves in GaAs along highsymmetry axes". Fundamentals of Semiconductors. Physics and Materials Properties (4th ed.). Springer. p. 111. ISBN 9783642007095.
 ^ ^{a} ^{b} Misra, Prasanta Kumar (2010). "§2.1.3 Normal modes of a onedimensional chain with a basis". Physics of Condensed Matter. Academic Press. p. 44. ISBN 9780123849540.
 ^ Mahan, Gerald (2010). Condensed Matter in a Nutshell. Princeton: Princeton University Press. ISBN 9780691140162.
 ^ Kittel, Charles (2004). Introduction to Solid State Physics, 8th Edition. Wiley. p. 100. ISBN 9780471415268.
 ^ MIT. (2015). "Tunneling across a tiny gap." http://news.mit.edu/2015/phonontunnelingheatflownanometergaps0407. Retrieved December 24, 2018.
 ^ Feynman, Richard P. (1982). Statistical Mechanics, A Set of Lectures. Reading, MA: BenjaminCummings. p. 159. ISBN 9780805325089.
 ^ Marquet, C.; SchmidtKaler, F.; James, D. F. V. (2003). "Phonon–phonon interactions due to nonlinear effects in a linear ion trap" (PDF). Applied Physics B. 76 (3): 199–208. arXiv:quantph/0211079. Bibcode:2003ApPhB..76..199M. doi:10.1007/s0034000310977.
 ^ Reiter, D. E.; Sauer, S.; Huneke, J.; Papenkort, T.; Kuhn, T.; Vagov, A.; Axt, V. M. (2009). "Generation of squeezed phonon states by optical excitation of a quantum dot" (PDF). Journal of Physics: Conference Series. Institute of Physics. 193: 012121. doi:10.1088/17426596/193/1/012121.
 ^ Alberto Nicolis and Riccardo Penco. (2017). Mutual Interactions of Phonons, Rotons, and Gravity Retrieved November 27, 2018
 ^ Angelo Esposito, Rafael Krichevsky, and Alberto Nicolis. (2018). The mass of sound Retrieved November 11, 2018
 ^ https://phys.org/news/201808phononsmassnegativegravity.html Retrieved November 27, 2018
 ^ Enamul Haque and M. Anwar Hossain. (2018). prediction of phononmediated superconductivity in XBC (X= Mg, Ca, Sr, Ba) Retrieved November 27, 2018
External links
 Explained: Phonons, MIT News, 2010.
 Optical and acoustic modes
 Phonons in a One Dimensional Microfluidic Crystal [1] and [2] with movies in [3].
Other Languages
 العربية
 অসমীয়া
 বাংলা
 Беларуская
 Български
 Català
 Čeština
 Dansk
 Deutsch
 Eesti
 Ελληνικά
 Español
 فارسی
 Français
 Gaeilge
 한국어
 Հայերեն
 Bahasa Indonesia
 Italiano
 עברית
 Қазақша
 Magyar
 Македонски
 Bahasa Melayu
 Nederlands
 日本語
 Norsk
 Norsk nynorsk
 Polski
 Português
 Română
 Русский
 Simple English
 Slovenčina
 Slovenščina
 Suomi
 Svenska
 ไทย
 Türkçe
 Українська
 Tiếng Việt
 中文
Copyright
 This page is based on the Wikipedia article Phonon; it is used under the Creative Commons AttributionShareAlike 3.0 Unported License (CCBYSA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CCBYSA.