Tonne

tonne
A 1-tonne weight (geograph 6511341).jpg
A one-tonne (1,000 kilogram) concrete block
General information
Unit system Non-SI unit accepted for use with SI
Unit of Mass
Symbol t
In SI base units: 1 t = 1,000 kg = 1 Mg

The tonne (/tʌn/ (About this soundlisten) or /tɒn/; symbol: t) is a metric unit of mass equal to 1,000 kilograms.[1] It is also referred to as a metric ton.[2][3] It is equivalent to approximately 2,204.6 pounds;[4] 1.102 short tons (US), and 0.984 long tons (UK). The official SI unit is the megagram (symbol: Mg), a less common way to express the same mass.

Symbol and abbreviations

The BIPM symbol for the tonne is t, adopted at the same time as the unit in 1879.[5] Its use is also official for the metric ton in the United States, having been adopted by the United States National Institute of Standards and Technology (NIST).[6][7] It is a symbol, not an abbreviation, and should not be followed by a period. Use of minuscule letter case is significant, and use of other letter combinations can lead to ambiguity. For example, T, MT, mT, Mt and mt are the SI symbols for the tesla, megatesla, millitesla, megatonne (one teragram), and millitonne (one kilogram) respectively. If describing TNT equivalent units of energy, one megatonne of TNT is equivalent to approximately 4.184 petajoules.

Origin and spelling

In English, tonne is the established spelling alternative to metric ton.[8] In the US and UK, tonne is usually pronounced the same as ton (/tʌn/), but the final "e" can also be pronounced, i.e. "tunnie" (/ˈtʌni/).[9] In Australia, the common and recommended pronunciation is /tɒn/.[10][11] In the United States, metric ton is the name for this unit used and recommended by NIST;[6] an unqualified mention of a ton almost invariably refers to a short ton of 2,000 pounds (907 kg), and tonne is rarely used in speech or writing. Both terms are acceptable in Canadian usage.

Ton and tonne are both derived from a Germanic word in general use in the North Sea area since the Middle Ages (cf. Old English and Old Frisian tunne, Old High German and Medieval Latin tunna, German and French tonne) to designate a large cask, or tun.[12] A full tun, standing about a metre high, could easily weigh a tonne.

The spelling tonne pre-dates the introduction of the SI in 1960; it has been used with this meaning in France since 1842,[13] when there were no metric prefixes for multiples of 106 and above, and is now used as the standard spelling for the metric mass measurement in most English-speaking countries.[14][15][16][17] In the United States, the unit was originally referred to using the French words millier or tonneau,[18] but these terms are now obsolete.[3] The Imperial and US customary units comparable to the tonne are both spelled ton in English, though they differ in mass.

Conversions

One tonne is equivalent to:

  • In kilograms: 1000 kilograms (kg) by definition.[1]
  • In grams: 1000000 grams (g) or 1 megagram (Mg). Megagram is the corresponding official SI unit with the same mass. Mg is distinct from mg, milligram.
  • In pounds: Exactly 1000/0.45359237 pounds (lb) by definition of the pound,[19] or approximately 2204.622622 lb.
  • In short tons: Exactly 1/0.90718474 short tons (ST), or approximately 1.102311311 ST.
    • One short ton is exactly 0.90718474 t.[20]
  • In long tons: Exactly 1/1.0160469088 long tons (LT), or approximately 0.9842065276 LT.
    • One long ton is exactly 1.0160469088 t.[20]

A tonne is the mass of one cubic metre of pure water: at 4 °C one thousand litres of pure water has an absolute mass of one tonne.[21]

Derived units

For multiples of the tonne, it is more usual to speak of thousands or millions of tonnes. Kilotonne, megatonne, and gigatonne are more usually used for the energy of nuclear explosions and other events in equivalent mass of TNT, often loosely as approximate figures. When used in this context, there is little need to distinguish between metric and other tons, and the unit is spelt either as ton or tonne with the relevant prefix attached.[22]

Tonnes Grams Equivalents*
Multiple Name Symbol Multiple Name Symbol Tonnes (t) Kilograms (kg) Grams (g) US/short tons (ST) Imperial/long tons (LT)
100 tonne t 106 megagram Mg 1 t 1,000 kg 1 million g 1.1023 ST 0.98421 LT
103 kilotonne ktǂ 109 gigagram Gg 1,000 t 1 million kg 1 billion g 1,102.3 ST 984.21 LT
106 megatonne Mt 1012 teragram Tg 1 million t 1 billion kg 1 trillion g 1.1023 million ST 984,210 LT
109 gigatonne Gt 1015 petagram Pg 1 billion t 1 trillion kg 1 quadrillion g 1.1023 billion ST 984.21 million LT
1012 teratonne Tt 1018 exagram Eg 1 trillion t 1 quadrillion kg 1 quintillion g 1.1023 trillion ST 984.21 billion LT
1015 petatonne Pt 1021 zettagram Zg 1 quadrillion t 1 quintillion kg 1 sextillion g 1.1023 quadrillion ST 984.21 trillion LT
1018 exatonne Et 1024 yottagram Yg 1 quintillion t 1 sextillion kg 1 septillion g 1.1023 quintillion ST 984.21 quadrillion LT

*The equivalent units columns use the short scale large-number naming system currently used in most English-language countries, e.g. 1 billion = 1,000 million = 1,000,000,000.
Values in the equivalent short and long tons columns are rounded to five significant figures. See Conversions for exact values.
ǂThough non-standard, the symbol "kt" is also used (instead of the standard symbol "kn") for knot, a unit of speed for aircraft and sea-going vessels, and should not be confused with kilotonne.

Alternative usage

A metric ton unit (mtu) can mean 10 kg (approximately 22 lb) within metal (e.g. tungsten, manganese) trading, particularly within the US. It traditionally referred to a metric ton of ore containing 1% (i.e. 10 kg) of metal.[23][24] The following excerpt from a mining geology textbook describes its usage in the particular case of tungsten:

"Tungsten concentrates are usually traded in metric tonne units (originally designating one tonne of ore containing 1% of WO3, today used to measure WO3 quantities in 10 kg units. One metric tonne unit (mtu) of tungsten (VI) contains 7.93 kilograms of tungsten." (Walter L Pohl, Economic Geology: Principles and Practices, English edition, 2011, p 183.)

In the case of uranium, MTU is sometimes used in the sense of metric ton of uranium (1,000 kg).[25][26][27][28]

A gigatonne is a unit of mass often used by the coal mining industry to assess and define the extent of a coal reserve.

Use of mass as proxy for energy

The tonne of trinitrotoluene (TNT) is used as a proxy for energy, usually of explosions (TNT is a common high explosive). Prefixes are used: kiloton(ne), megaton(ne), gigaton(ne), especially for expressing nuclear weapon yield, based on a specific combustion energy of TNT of about 4.2 MJ/kg (or one thermochemical calorie per milligram). Hence, 1 t TNT = approx. 4.2 GJ, 1 kt TNT = approx. 4.2 TJ, 1 Mt TNT = approx. 4.2 PJ.

The SI unit of energy is the joule. Assuming that a TNT explosion releases 1,000 small (thermochemical) calories per gram (approx. 4.2 kJ/g), one tonne of TNT is approx. equivalent to 4.2 gigajoules.

In the petroleum industry the tonne of oil equivalent (toe) is a unit of energy: the amount of energy released by burning one tonne of crude oil, approx, 42 GJ. There are several slightly different definitions. This is ten times as much as a tonne of TNT because atmospheric oxygen is used.

Unit of force

Like the gram and the kilogram, the tonne gave rise to a (now obsolete) force unit of the same name, the tonne-force, equivalent to about 9.8 kilonewtons: a unit also often called simply "tonne" or "metric ton" without identifying it as a unit of force. In contrast to the tonne as a mass unit, the tonne-force or metric ton-force is not acceptable for use with SI, partly because it is not an exact multiple of the SI unit of force, the newton.

See also

Copyright